Uncategorized

Grand Chute (WI) Pierce PUC Rescue-Pumper

01 / 08

Grand Chute (WI) Pierce PUC Rescue-Pumper

Pierce Manufacturing built this PUC™ rescue-pumper on a Velocity chassis and a rescue pumper body for Grand Chute (WI) Fire Department. (Photo courtesy of Pierce Manufacturing Inc.)

02 / 08

Grand Chute (WI) Pierce PUC Rescue-Pumper

The Grand Chute rescue pumper built by Pierce has a Pierce PUC 1,500-gallons per minute (gpm) pump, a 750-gallon water tank, and a Husky® 12 foam system. (Photo courtesy of Grand Chute Fire Department.)

03 / 08

Grand Chute (WI) Pierce PUC Rescue-Pumper

The pump control panel for the PUC pump is compact, saving space for other compartmentation on the rig. (Photo courtesy of Grand Chute Fire Department.)

04 / 08

FA050817 Petrillo4

05 / 08

Grand Chute (WI) Pierce PUC Rescue-Pumper

All the equipment on the Pierce-built rescue-pumper for Grand Chute Fire Department is mounted on slide out trays, drop down trays, and swing-out or slide-out tool boards. (Photo courtesy of Grand Chute Fire Department.)

06 / 08

Grand Chute (WI) Pierce PUC Rescue-Pumper

The rescue-pumper's front bumper holds 100 feet of preconnected 1-3/4-inch hose. (Photo courtesy of Grand Chute Fire Department.)

07 / 08

Grand Chute (WI) Pierce PUC Rescue-Pumper

Grand Chute's rescue-pumper has an 84-inch long cab with a transverse compartment at its rear for EMS (emergency medical services) equipment. (Photo courtesy of Grand Chute Fire Department.)

08 / 08

Grand Chute (WI) Pierce PUC Rescue-Pumper

The PUC pump is mounted low on the chassis, with cross lays above it, and a transverse storage compartment above the cross lays. (Photo courtesy of Grand Chute Fire Department.)