Magnalight.com Announces Release of Powerful LED Light Emitter with Magnetic Mount

The Magnalight LED10W-6R-HT is a durable and compact LED light that offers high light output and a combined handle and magnetic mounting system to provide both convenient mobility and secure mounting of the unit on any surface that will accept a magnet. This lightweight LED light produces an impressive 5,400 lumens and is capable of throwing a light beam over 600 feet in length, yet uses less than half the amount of electrical power as comparable incandescent lamps. Capable of operating on any voltage from 9 to 50 VDC, this unit is ideal for use on boats, vehicles, equipment, and anywhere a common 12-24 volt DC current source is available.

Designed for rugged performance and versatile placement, the Magnalight LED10W-6R-HT Portable Magnetic Mount LED Light Emitter is an excellent lighting solution for applications where an easily relocated yet powerful source of illumination is required.  Drawing only 6 amps at 60 watts from a 12 volt electrical system, this versatile light emitter produces a 5,400 lumen light beam reaching up to 675 feet in length when configured in spot mode. An extruded aluminum body housing six Seoul Z-Power 10 watt LEDs provides IP68 rated waterproof protection for the internal electronics, while unbreakable polycarbonate lenses protect the LED and reflector assemblies.  A 200lbs grip magnetic mounting base gives operators the ability to quickly and easily mount the light on any metallic surface that will accept a magnet, and an integrated handle provides convenient directional control and easy carrying. Stainless steel hardware rounds out the assembly, providing resistance to corrosion and the elements. Available in spot or flood configurations, this unit produces a beam approximately 675 feet long in spot mode, and a beam 270 foot long by 240 foot wide in spot configuration. The LEDs and advanced design of this unit produce an LED lifespan of up to 50,000 hours, making this unit able to operate for years without the need for replacing lamps. A simple Deutsch IPD / LADD DT04-2P connector provides easy yet reliable connection to power sources. Originally designed to MILSPEC 461 (EMI) this unit has 15.6Grms of rated vibration tolerance and is IP68 rated waterproof to three meters.

“The LED10W-6R-HT is a magnetic mount LED lighting alternative to the traditional six inch round high wattage halogen lights popular in military and utility sector applications,” said Rob Bresnahan with Larson Electronics’ magnalight.com. “While the form factor is similar, the longevity, durability and light output are significantly higher than the comparable incandescent lighting, while drawing less than half of the amps that the halogen lamps typically take. Finally, our magnetic mount LED light operates on a wider range of voltages, so operators can easily move this light from a 12 volt vehicle to a 24 volt vehicle without having to make any adjustments.”

Larson Electronics’ Magnalight.com carries a full inventory of LED light bars, LED boat lights, LED spotlights and marine lighting equipment. View Magnalight’s full line of lighting equipment by visiting Magnalight.com. Magnalight can be contacted by calling 1-800-369-6671 or 1-214-616-6180 for international inquiries.

Previous articleAkron Brass Aids Firefighters in Texas Wildfires
Next articleUpdated MSA Gas Detection for Clandestine Drug Labs Bulletin Now Available

Magnalight.com Announces Release of Explosion Proof Emergency Light with Back Up Emergency Battery

Magnalight by Larson Electronics announced today the release of the EXP-EMG-12W-2L explosion proof emergency light with battery backup that provides 90 minutes of light operation in the event of power failure or any incident which results in the interruption of current to the light. 

This Class 1 Division 1, Class 2 Division 1 & 2 approved emergency light contains two 6 watt LED lamps, a high temperature Nickel-Cadmium rechargeable battery, and is designed to provide up to 10 years of reliable low maintenance operation. This emergency light offers an ideal solution for hazardous locations requiring a dependable source of failsafe illumination.

Magnalight by Larson Electronics, Model EXP-EMG-12W-2LThe EXP-EMG-12W-2L explosion proof emergency light from Magnalight.com is designed with LED equipped lamps and a high temperature Nickel-Cadmium battery to provide a long lived lighting solution for areas requiring a light fixture that meets National Electrical Code and Life Safety Code emergency lighting requirements. 

Two 6 watt LED lamps in this unit provide high light output combined with low power draw to produce a highly reliable emergency light source that can operate for 90 minutes in the event of power failures. 

A high temperature Nickel-Cadmium battery rated at 7-10 years of operational life provides power for the lamps in the event of power failure and is recharged automatically during normal operation to maintain a full charge at all times. 

Magnalight by Larson Electronics, Model EXP-EMG-12W-2LThe EXP-EMG-12W-2L is an ideal solution for operators who wish to ensure their hazardous workspaces employ the most effective and reliable safety lighting options available. Under normal conditions this emergency lamp uses normal external power to illuminate its two 6 watt LED lamps. 

In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for 90 minutes or until power is restored. Once power is restored, a built in charger will return the unit to a fully charged state within acceptable UL time limits. 

Protection for the battery comes from integral solid state circuitry which senses a low voltage condition and turns off the unit before battery damage can occur from deep discharging. An integrated pilot light allows operators to easily verify the presence of AC current and a test switch provides simple confirmation of proper emergency operation.
 
Constructed of copper free aluminum and finished in an epoxy powder coat for resistance to corrosion, the EXP-EMG-12W-2L can withstand temperature variances ranging from 0° to 40°C. The LED lamps in this unit are exceptionally long lived and highly resistant to damage from shocks, impacts and vibrations and are protected by impact resistant glass globe lenses. This unit is designed to operate with voltages ranging from 120V to 277V@ 50/60HZ to allow easy connection over a wide array of locations and power configurations. Operation of this light is fully automatic and very little maintenance is required to maintain optimum operating performance.   “This is a very competitively priced explosion proof emergency “bug eyes” LED light,” said Rob Bresnahan with Larson Electronics’ magnalight.com.  “With integrated Class 1 Division 1 and 2 and Class 2 Division 1 and 2 ratings, this emergency LED light with two LED lights and integrated nickel is ideally suited for any hazardous location environment.”

 
Larson Electronics’ Magnalight.com carries an extensive line of explosion proof LED lights, hazardous location LED lights, intrinsically safe LED lights, LED work lights and LED general area work lights. 

You can view Larson Electronics’ entire Magnalight line of explosion proof lighting at Magnalight.com. Larson Electronics can be reached directly by calling 1-800-369-6671 or 1-214-616-6180 for international inquiries.