Vent Boss Rescue Saw

Coatesville, PA—Cutters Edge and TheFireStore have collaborated to produce the Exclusive Vent Boss Rescue Saw. The Vent Boss, powered by a Husqvarna engine and is available in a 16” or 20” model.

The Vent Boss delivers up to 13,300 RPMs with its Husqvarna 73.5-cc, 5.7-hp, single-cylinder, two-cycle engine.

Specifications include:
•    Maximum Torque: 4.5 Nm @ 8,100 rpm
•    Maximum Power Speed: 9,600 rpm
•    Maximum Engine Speed: 13,300 rpm
•    Idling Speed: 2,700 rpm
•    Modular One-Piece Ignition System
•    Centrifugal Air Filtration System w/High Volume-Heavy Duty Felt Filter
•    Lightweight, High Strength Magnesium Crankcase
•    Three-piece Crankshaft
•    23.67 fl. oz. Fuel Tank
•    Fuel Mix Ratio 50:1

The large “glove friendly” D-shaped pull handle gives Vent Boss operators an advantage. In addition, the Vent Boss has a combined choke/stop control that allows for easier starting and reduces the risk of “flooding” the engine. A compression relief valve also reduces starting resistance for an easier start.

The throttle lockout is designed to prevent accidental operation. When you press the lock, it releases the throttle control. When you release the handle, both the throttle control and the throttle lockout move back to their original positions. This arrangement means that the throttle control is automatically locked at the idle setting.

With a max-power chain speed of 75.67 fps the saw features a dual-raker fire-department-style carbide-tipped cutting chain. Easy side access allows for trouble-free chain tension adjustment. The inertia-activated chain brake stops chain rotation in less than 1/20th of a second. This quick-acting chain brake protects an operator in the event of a kickback thus reducing the risk of accidents.

Air intake features a centrifugal air cleaning system with a high-volume heavy-duty felt filter that protects the engine from smoke, dust, and steam. The top radius of the guard plate, combined with the top ported muffler and arcuate shaped chain brake handle, directs the engine’s pressurized exhaust flow to blow the smoke and heat away from the operator while the saw performing ventilation cuts.

The Vent Boss is equipped with a vibration-damping system designed to reduce vibration and make operation easier on the operator. The body of the Vent Boss, including the cutting equipment, is insulated from the handles by vibration-damping units. The full-wrap, rubber-coated, anti-vibration mounted handles further reduce the transfer of vibration between the Vent Boss and the operator.

The adjustable Guard/Depth Gauge® with integrated guard plate protects the operator from accidental contact with the chain and allows depth of cut to be set to avoid cutting structural members. The tool-less design allows for fast and easy adjustments or removal—even with gloves on. With the Guard/Depth Gauge® removed, the Vent Boss assumes a conventional chain saw configuration. A spiked bucking dog can be attached to the saw to stabilize and support the saw.

For more information, visit TheFireStore.com.


MULTI-CUT Fire Rescue Saw
The only Fire Rescue Saw designed and built specifically to operate in hot, smoky fireground conditions and comes equipped with the patented BULLET® Chain that cuts faster, safer and lasts up to 20 times longer than standard chains. The MULTI-CUT also features a Tool-Less Guard/Depth Gauge that protects the operator and allows fast and easy adjustments, in seconds to prevent cutting any deeper than absolutely necessary. The MULTI-CUT is available in a Portable Field Kit that contains everything needed for any Rescue Situation and is protected by a rugged Diamond Plate Aluminum Field Case.

No posts to display