PSD "Silent Pak" pump allows for a 1,500-gpm NFPA-rated pump without a pump transmission. After working closely with Chelsea and Allison, Darley received approval for a 1,500-gpm rating from Chelsea when using its Model 870XAFJP-B5XV series PTO with a 200 percent ratio and an Allison EVS 3000 Series transmission. The engine speed needed is only 2,049 rpm, so it can be matched with most engines on the market capable of producing at least 225 net horsepower. The Allison transmission must be ordered with the 1:00 PTO provision, but the pump can run off the 8:00 or 1:00 position. The pump weighs 225 pounds and, without the transmission to generate noise, is quiet.
Low- and high-pressure respirators and respirator systems are NIOSH-approved. Low-pressure systems are manufactured with a continuous-flow supplied-air full-mask, half-mask, hood, helmet, or Air Shield, in addition to a supplied air source and 50 or 100 feet of breathing air hose. These systems are good for one to three workers. The Supplied Air Shield is available in a low- or high-pressure model for use with grinding, chipping, spray painting, and auto body repair. The visor is made of Nylon plastic, the lens is polycarbonate, the chin guard is polypropylene for added strength, and the shroud is cotton for comfort. The Full Mask Supplied Air Respirator, available as a low- or high-pressure system, is made of silicone rubber for durability and will hold its shape even in extreme heat and cold.
All-terrain LENTRY® LED light units combine Honda super-quiet series generators with extendable, all-terrain legs and telescoping lights. Each LED light used on a LENTRY System telescope is 120 V, generates 20,000 lumens of light, draws only two amps, and uses just 240 W of power. Each LED lamp head comprises 60 ultra-bright white LEDs-48 for floodlighting and 12 focused spot lights. The unique lens helps direct floodlighting onto the work area and simultaneously a spotlight beam into the distance. Multiple telescoping LEDs are available on a single portable LENTRY Light System with a choice of height-3½ to nine feet tall. The system has legs and lights that retract for storage and transport.
LENTRY® Legs are now available that fit certain compact hydraulic extrication rescue pumps by Genesis and Holmatro. Specifically, LENTRY Legs are available to fit Holmatro DPU 31 PC pumps or Genesis Eco Silent Simo power pumps, increasing their life-span, ease of setup, and functionality. Also called frames or stands, all-terrain LENTRY Legs are made in the USA by first responders and are engineered to overcome unpredictable terrain and withstand rough handling. Adding LENTRY Legs allows setup of the pump on uneven ground, hills, and even stairs. The legs extend a little or a lot, as needed, yet retract for storage and transport. They even serve as a roll bar, protecting the expensive pumps from damage. Each leg adjusts and locks independently with the turn of a knob, providing a flat, level surface no matter the terrain.
The Jammer hangs on the inside of a door hinge, which prevents it from closing. The Jammer is suitable for use by emergency services personnel. It is easy and fast to set, fits nearly any door, and stays in place until removed. It is also very convenient and easy to carry. Once set, the Jammer stays in place until removed. Opening and closing the door will not dislodge the device. The device fits easily in a shirt pocket, service vest, or helmet. Its high-visibility yellow color allows firefighters to mark a room. It quickly identifies the door entered. Custom colors and printing available.
FPS-COM-PLUS fully integrated communication system is specifically designed for the Dräger FPS 7000 full face mask. Developed for use by firefighters and first responders, the new communication unit provides clear voice transmission, even under extreme emergency conditions. The integrated microphone of the FPS-COM-PLUS picks up the wearer's voice inside the mask. Noise reduction technology filters out all other sounds and transmits only the user's voice by amplifier or radio. Pure breathing sounds are not transmitted. The voice amplifier system, with twin speakers on left and right of the mask, ensures a perfectly balanced system with a surround sound output that enhances the clarity of messages received. The FPS-COM-PLUS communication unit is quick and easy to operate, even with thick gloves. Improving safety and reliability, an on/off switch is operated only by applying deliberate pressure to the switch. Equipped with a protective rim on one side, it prevents accidental switching off of the communication unit during use.
Quickstop multifunctioning fire sprinkler tool stops the flow of water from broken, damaged, activated, and sheared sprinkler heads. The Quickstop can shut down multiple heads with a single tool. Most importantly, it allows the building's entire fire protection system to remain functional. Benefits include: reduced on-scene times for fire crews, one tool to shut down multiple heads, decreased department liability of replacing fire sprinkler heads, and not having to leave sprinkler tools at the scene.
Beam Cutter Model #PR-2700 allows users to convert a circular saw into a tool that can rip lumber up to 12 inches thick, cut angles up to 45 degrees, and cut multiple stair jacks and rafters in one pass. The unit's design allows it to fit 99 percent of all 7¼-inch circular saws, including Skil, Bosch, Dewalt, Craftsman, Black & Decker, Rigid, Milwaukee, Porter Cable, Hitachi, and Makita (excluding plate-adjustable saws).